What preparations should made for abrasive flow polishing?
2018/9/4??????view:
Abrasive flow polishing is the chamfering deburring and mirror polishing of small holes, cross holes, special-shaped holes, surfaces and diamond corners of metal parts and components with special abrasive. This processing technology can effectively Polish parts concealed parts. The abrasive will transfer the pressure produced by the machine to the parts for grinding, polishing, chamfering, deburring, etc. The abrasive moves up and down, and rubs the surface. General abrasive material, particle size, viscosity can determine the effect of polishing, polishing before what preparation work?
Before polishing the workpiece with abrasive, it is necessary to clean the parts, especially the small hole, narrow groove and precision machining department. Cleaning before machining is to remove granular materials from parts. Large granular materials can clog small holes and even damage the machined surface. So cleaning is particularly important. Fixture fixing
And can make the abrasive to the surface of the parts to be processed, some parts do not need parts as an auxiliary, the mold needs a large number of production jigs to assist, furniture is generally made of alloy, stainless steel, nylon and so on.
Before polishing the workpiece with abrasive, it is necessary to clean the parts, especially the small hole, narrow groove and precision machining department. Cleaning before machining is to remove granular materials from parts. Large granular materials can clog small holes and even damage the machined surface. So cleaning is particularly important. Fixture fixing
And can make the abrasive to the surface of the parts to be processed, some parts do not need parts as an auxiliary, the mold needs a large number of production jigs to assist, furniture is generally made of alloy, stainless steel, nylon and so on.
- Pre： Cross hole deburring 2018/9/4
- Next：cases of precision casting pol 2018/9/4
