Solution for micro hole polishing
Solution for micro hole polishing
Zhejiang Diyoole Intelligent Equipment Co., Ltd. successfully solved the problem of deburring micro-holes for Korean customers. Before deburring micro-holes, electrolysis was simple and easy, and then eliminated. The small hole usually has a diameter less than 1mm, and the ordinary physical polishing method can not be used. It is really not easy to find a plan that can remove small hole burrs and meet environmental standards.
In fact, small hole deburring has its own unique method for our company. When we polish the small hole workpiece, we will choose a completely liquid abrasive, through any aperture of the workpiece will not cause blockage or residual material. Under the action of hydraulic system, the liquid abrasive can keep high pressure and quickly wash the inner wall of the workpiece hole, thus achieving the grinding effect. Because of the existence of liquid, no high heat is generated, no sparks are generated, so the workpiece will not burn.
- Pre： Inner hole polishing machinei 2018/9/4
- Next：Abrasive flow machine is suita 2018/9/4
